Reply to "Rear lights--LEDs anyone?"

roverltdMember

I started to change out the rear brake and front turn-single lights to LEDs. I found out that when all four bulbs were replaced the turn signal flasher would not work. By replacing two of the bulbs with normal filiments it worked. I assumed that the LEDs had less current draw and with all 4 bulbs, there was not enough to activate the flasher. I used APC units avialable from Summit Racing. They run about $10 each. I ended up only having the rear brake light with the LED.

The other backup and running lights were not worth the cost to replace to LEDs.

4/4/068:53 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...