Reply to "Rear main seal replace.....in place?"

kaamacatMember

Jack. Yes. When I picked up the car in Nov2003 there was "oil drippage". The first area was the oil pan weeping around the bolt areas, so I DID do the X-Member cut/replace at that time. I'm kicking myself now for not doing the seal then. (I wasn't 100% sure because I had lots of oil gathering on the rear intake, traveling down the block rear....because rtv was used when the gap was clearly "std" enough for the rubber seal to be used with the intake pan). But hey, that gave me time to do it right, clean the intake....etc.

Only one thing it can be now, so that is this weekends project.

Thanks for the inputs.
Bob!

3/23/042:19 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...