Reply to "Rear shock/spring installation"

bosswrenchMember

BD, I recommend a hydraulic or arbor press, and a pair of long forceps or needle-nose pliers to fit the split locks in place. Even with only a little spring compression, if something shifts during installation of the locks, you could break a finger. I made a crude jig from a 2" pipe fitting with an access window cut in its side. The jig sits on top of the spring retainer washer and is pushed down with the press. The locks go thru the window with pliers.

6/29/1311:59 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...