Reply to "Rear Wheels Leaning In?"

You guys are on the right track. Few realize that the removable cross member bar in the engine bay helps locate the upper a-arms. To get your rear suspension geomotry right you have to install it with no load on the rear wheels. Do not pre-load the member, but have all the weight off the wheels and then install it. And really crank down hard on the bolts because it will be under load once you lower the car back down. When I did this I gained almost a quarter inch of extra space inside the sidewalls of the engine bay. It is a miracle I tell you!! Imagine just doing something so small making such a huge differance in how the car feels. All you have to do is read this board and the email letter and you pick up on all sorts of cool stuff.