#613 size is 10mm x 1.0 (1)On the ring gear bolts they strech out plus they still have the serrated head so I would not reuse them. (2)Install the C.W.P. with the timming mark,that is where the factory set the back lash at the time of lappeing,(3) yes you replace the bolts with stainless,(4)No gasket just sealer,(5)If you go with a shorter ratio you gain low end and a taller ratio you get top speed or lower rpm,(6)the gears in you box are designed to have steel only,(7)NO this is a plug hole that was cross drilled for the detents,(8)Call me on this one.
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.