Reply to "Rebuilding stock front calipers"

mangustaMember

STill not quite done with this brake job!

Replaced the front bleeder valves...and found out that they are too short! I can get at one fine, but the second one has interference from one of the 4 caliper bolts holding the two halves together!

Also pedal is way down at bottom of travel (15/16" unit) Solid once you get there and brakes work good! But more on this later.....

I need to understand what source we have for getting new long bleeder screws. Mine were pretty buggered up on the hexes, so want to put new ones on.....

Again, front stock calipers on a 74. Front bleeder screws. Part number if ya got it would be appreciated!
Thanks!
Steve

9/17/1710:05 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...