Reply to "Rebuilt the clutch master cylinder."

Cozman (Guest)

Got the new one today and replaced it.
Pretty straight forward process. Remove the pen holding the linkage for the clutch peddle, remove the old cylinder, remove the rod clevis off the old plunger and put it on the new one at the same distance.
Cut the old flare off, reflare the the end and put it all back together.
Adjusted the clutch for free play and throw and it's never shifted better.
The only problem I had was the fluid tubing was about an inch short no matter what I did. So I routed it through the battery opening for the time being. It just made it.
Next time the car is up in the air, I am going to replace the whole line with braded line and take it back through the hole that it and the brake line runs through.
Took about 2 hours with the clutch adjustment.
Want to thank Jerry at PI, Mike Daily for a great and informative website, and Jack, all of which got me through another learning experience with success.....
Thanks guys.

11/26/039:04 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...