Reply to "Reinforcement of the chassis ..... again"

tyler5Member

Hello Gents, let me fill you in on my mods. #1387 I made a full perimeter frame from 1"x1-1/2" tube. tied it to two full runs from Rad. support back to the eng. bay along side the console with cross braces. New floor pans of course. it gets tight back there but doable. cant drop the oil pan anymore. cross bracing thru original frame into lower A arm mounts and radiator support replaced with this tube also. A pillar and B pillar plates added inside cab and eng bay. Additional cross bracing at upper rear A arms. Car is slammed wide body but still has 4"front and 4-1/2" rear ground clearance. Cannot even see the mods unless you know what your looking at. Running a 410 Cleveland with all the upgrades making more power than the ZF can handle. 335/35/17s 14" Wilwood brakes ect. Yes a lot of work but well worth it! car is a rock at 2800lbs

5/1/189:08 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...