Reply to "Removal of pilot bearing "holder""

...If you can find a 'True' Oilite Bronze Bearing, for the 351C, that is great news to all of us! I was under the impression that it did Not exist. I was making them for a couple of years. Beefier than you'll ever find from 'Joe Blows Shop'. I stoped Machining them for a short while, as the 'Market' had become saturated and they were not selling. If you cannot locate what you want, I can be reached at pantera1974@verizon.net I will specially Machine your Bearing for you, but the price had to be raised as My cost was raised. I was 'Holding the line' at $25. I doubled that to $45. I will compromise and let them go for $35. Plus $4.05 Shipping and Handling; For any Pantera owner on this BB. They are the very best any amount of money can buy. The Price is Not All about the money, it is about the Emmense amount of time it takes to set-up and machine these things. There are aproximately 14 operations to finish ONE to 'Zero Error Concentricity'. And then locating and ordering the Oilite, in the first place. And I have been very busy back in school and on the Machinist job. I don't have as much free time as I used to. Good-Luck on your search, they'll be here if you need them...