Remove the bushing between the pilot bearing and the crankshaft

haydudeMember

Not sure what to call it. I received the new Bronze Pilot Bearing from Marlin and am preparing to install it. I got the old pilot needle bearing out but now there is one more bushing? or something that needs to be removed. The pilot bearing removal tool could not get a grip in it to remove. Any thoughts on this? The roller bearing has an OD of ` .93". The new bronze bearing is ~1.38". The flange on the crank has a OD of `1.74" and then the new bearing will fit inside that. I can give you a drawing of what I see if that will help.

Thanks ahead for any assistance.

Ken

8/22/244:10 PM

Original Post

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...