I tried numerous ways to remove the undercoating and I settled on a hot air gun with a putty knife as the easiest. Then I came back through with a wire wheel on a die grinder to polish the last of it off.
The remnants can be removed with any good solvent, M.E.K. methyl ethyl ketone is a good strong solvent, use with care and in good ventilation.
Julian
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.