I was pleasantly surprised at the ease of the process,
I have removed the bushings from the front A-Arms and have found their ODs
to be a consistent 1.184". the A-arm bore IDs varied slightly around
1.181". this makes sense as the IDs would be 30mm with the bushings
oversized for MY expected press fit of ~ 0.003".
NOW, the new bushing ODs vary around 1.189". to ME, that is way too much
press and could plastic yield the A-arm bores.
QUESTION
Is it expected to machine the new bushing ODs?
(Pretty common practice for new parts to be oversized for field fitting in the machines I use to work to allow for possible damage/wear.)
OR
Throw away the micrometers and get a bigger press?
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.