[QUOTE]Originally posted by captaintobeys:
I assume you just cut it off. I will have to check spare parts to see if I have another one. /QUOTE]
Yes, the one in the photo was cut in a lathe, but if you were careful and patient i think you could cut it with a "Dremel" tool and a thin cutting wheel.
If you have a old one of the correct type use that. Then if it gets fouled up it's no big loss.
Just check the old one works ok by putting it in a pot of water on the stove, heat it and see if it opens up ok. If so that should be ok to use for this experiment. You can cut up a new one if you are satisfied with how it works out.
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.