I would call Boyd Coddington Jr./aka American Republic Wheels as George mentioned. He use to make the wheels for Marino (and possibly still does? not sure), Marino was limited on sizes I wanted so I had to go direct to Coddington (there have been some name changes on companies since then), maybe Marino can do special orders now? Boyd could make the wheels custom to any size you want. He can change the hoop size from 15-20"+ and give you any width, any back space, and last time I spoke to him he had an exclusive forged hoop which is stronger and liter, welded to what I consider to be the most accurate Campy style reproduction center out there. If you don't like the polished look you can have them painted.
Be careful, there are some vendors that sell a wheel that has the center pentagon rotated (or at least they us to)...it is not a good clone of the wheel and was done to get around a exclusivity agreements with manufactures of the clone wheels. My wheels sizes are 17 x 8 front and 18 x 9.5 rear. When I bought my wheels the hoop size were very limited. If I could have I'd gone with 9" wide in the front and 11" in the rear.
Attachments
Images (1)
