The wiring harness for my 72 Pre-L Pantera is now ready for installation. The portion of the harness left of the red arrow had been lopped off and discarded by a prior owner when they were extracting it from the car. As with most of our cars the harness had numerous additions and modifications. It is now back to its original configuration. Its restoration includes a Pantera Electronics ATO fuse panel and new protective loom. The old factory loom had become rigid and cracked, and it has been replaced with braided split loom. Wilkinson was kind enough to let me use his wiring harness table and various wiring supplies. And Richard O. (opiecars here on the forum) supplied me with a donor harness that included the section that was missing. I hope to have it installed in the car within a day or so. The two illuminated bulbs are for the front side markers.
