Reply to "Rev kit / Valve float"

Yep, that is what I am going to do too. Dan says that building an engine that will withstand 7500 RPM running is a tall order but it is possible. For the valves you need to go to the Titanium so that your valve springs do not have to have such a high force. He said you also need to make sure you have a good cooling system including oil. That will kill ya real quick if than having a spike in oil temps. You also may need to re-enforce the block, George can tell you how to do that. And make sure everything is balanced and blueprinted down to the gnats behind. Oh yeah and use air craft qualit bolts on everything and roller lifters too. Keep forces as low as possible, use an aluminum flywheel. And I am sure I am forgetting a lot of stuff, but Dan and George will remember the stuff I forgot for sure.