quote:Originally posted by Rocky:
Like Steve, I have the 2 1/2" pipes. My buddy modified the collectors on my headers, and then ran larger diameter pipes to the stock ANSAs.
ANSA -1 Build
Anyway - if you are going even bigger, it's going to be tight. You may have to follow Julian's advice on the 180s!
Good Luck.
Rocky
This is not intended as a criticism but Precision Proformance already has built 2" primary tube with 3-1/2" collectors for the Pantera.
I have no idea how well they fit the application though. A smaller axle assembly might be required?
IF you ask me, the tubes show the typical "bluing" of the stainless tubing.
Ceramic doesn't do that ALTHOUGH it can dull in spots due to the heat.