Reply to "Rewiring the Entire Car - Painless Wiring Kit"

It is just the adjustable mechanism from a Honda Civic.
There is quite a bit of surgurey involved to get it to the point where you can weld it to the Pantera column.

It allows for basically the lowering of the column from stock height.

In my case the unit moves enough to actually lower the wheel into your lap.

The Honda mechanism is being a little difficult in that it is a friction device rather then a gear/ratchet design.

What I am saying is that it tends to slip down on you a little. I will be playing with it again over the winter and will see if I can come up with a solution to the issue or just scrap it all together and go back to stock.

What I like about this setup is that it looks like it is stock and the car came that way.

It also gives me the ability to adjust myself into the small cabin.

I also have lowered floor pans, 20 position adjustable power seats, and the pedals were moved forward over and inch.

That creates allot of room for me to squiggle around.

When I get back in the car I'll see if I can take some pictures for everyone. Sounds like more then just a few people are interested in this modification?