Reply to "Rich K's New Engine"

richkMember

More info. Flat tops , Compression height is 6.645 Speed Pro Hypereutectic pistons 4.030 bore ,or possibly forged 1.647 , my heads seem to be the 62.8 chamber casting # DOAE ,using felpro 1013 head gaskets Thickness: .041" bore 4.100 , unsure if the heads has ever been milled or the block decked , I’ll just have to believe they have not .the carb is a 750 vacuum secondary , the intake is a offenhauser 360 degree part # 5964 , if this intake is junk tell me what I need to get. Car has a 3:00 rear gear , TCI 10 inch street fighter torque converter maybe 2200 stall the lunati cam made the engine diesel when cutting the ignition off , the engine kept trying to run , and the motor just seemed weak and run out of steam pretty quick , may have been a valve spring issue
I had a crane 284 H12 part# 13305 228-228 @.050 112 lobe sep and it didn’t perform well either , I’m not dead set on a rpm peak , not sure what the limits of a hydraulic camshaft is
Thanks

2/5/1811:34 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...