Skip to main content

Reply to "RoadKill Garage 351c Build"

Trick flow intake ports per spec are a bit higher..(need to figure out how much).
I DID NOT do anything on the heads..as more precious..(smile). I modified the Edelbrock intake, is a bit tricky but via a tube cam could be done.

Modification just by fileing the upper portion of intake ports.  It is mainly on the top side as Heads are a bit up and intake hence too low/missmatch..The rest I did by playing with the gasket thickness. I did the gasked from scratch by special gasket paper..they come in different thicknesses.

 (I have digi cam pictures but hard to understand without lots of explain.)

(also you need to "Flatten" the carb side of intake by milling to make it "Flat" as original has an angle..then it fits the deck lit etc..). You Still need to modify the engine cover/the mesch metal thing..

 

 

Last edited by matg
×
×
×
×