Reply to "ROLL CALL: Jethot Coatings @ 500HP"

panteradougMember

@stevebuchanan posted:
It's not the end of the world. A little dulled ceramic coating shows that you survived a dyno run.

MY JBA's are that way. It comes from trying to lean out the idle. The headers will actually glow red in the dark for about 4-6" coming off of the heads.

They wind up a dull stainless steel mill finish look there. You can polish it out again if you want to.

My Pantera 180°'s were coated after the Webers were set up so it is likely why they did not suffer the same fate? Those are the Hall's. Made by Stan up at Ford Power Parts. You don't need to move the a/c condenser for them.

10/5/237:00 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...