Reply to "Ron (accobra) & all, another interesting intake manifold"

Panteradoug,

The picture I was told by Inglese is there vacumn kit. my intake was previuosly drilled exactly like the pic. What we use it for is another thing. I wondered if I could use it for PVC, power brakes, and vacumn advance as George and I were disucssing. I prefer in the middle down low as possible.

I guess I could use this for pcv and vacumn advance and attach power brakes to one port or can I use this for all 3. Its a common vacumn manifold like on a stock intake block with 3 connections. this will enable it to be drawn evenly ?

The pic cant be nitrous there are no injectors and there would be double line sets for fuel and gas ? NO ?

The post that rises from the manifold on mine I can thread the lines any route to avoid the linkage and down low exactly like the pic.

I asked first starting with Hall because it was their intake, they blew me off. Then inglese but they want my underware size on some big long application .. LOL .. Great idea I'll see if PI sells it. I'm a little slow on this stuff. Its a learning curve.

Ron