I do not believe that these are the exact rotors that Mike Drew ordered. I used these on the front of my car and found that the OD was too large. I had to machine them down to fit the stock calipers. Once I machined them down, I sent them out to be rebalanced since the balancing is done by removing material on the outer diameter of the rotor. That said they probably will work on the rear and may or may not clear the WilWood calipers on the front. One thing to note is that the holes for the wheel studs are not sized for our metric studs. The holes need to be bored out a little to fit, ~17mm as I remember.
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.