Reply to "Sacc Wilwood 6 piston with stock disc conversion"

tsoloMember

I purchased a set of those Porsche discs from Larry before going this route. The Porsche discs are an aluminum hat that he has machined to fit the Pantera hub, bolted to the cast rotor with maybe 6 5/16" bolts if I remember correctly. The set I received were machined so bad that they were not useable. I sent them back to him and explained the situation. He wanted to send me another set, but I've been disappointed enough by vendors to have learned my lesson. Then I called Centric and went the Mustang way. Maybe as you said you can cut the center out and machine down to the 7.75mm thickness and use washers behind the hats. Thats what needs to be done on the Wilwood hats. That said look into a set of Wilwood hats and rotors. Scott (SACC) should be able to help with that.

Steve

1/12/244:39 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...