Skip to main content

Reply to "Sacc Wilwood 6 piston with stock disc conversion"

Finally getting back on to the brakes!

I’m still trying to get some new discs made, but at this point my lovely wife would kill me if the car sits another six month just like that in the garage! So I got a set of used discs..

the bigger hold up were the highly unusual polyurethane bushings… Did a little write up about them here on this forum… Look for “

weirdest Poly bushings ??!!

” if interested..

Now that this problem is finally sorted in the rear I am back on to installing brake calipers…

one thing I forgot to do when I had everything apart was to chase the threats on the forward part of the uprights! Now I have to do it already installed in the car which is not very fun! Just test fitted the left side….

Also I got a new parking brake cable because on my original one the plastic shielding around was 80% gone and water got inside and it rusted itself in place…



IMG_0284

IMG_0283

Attachments

Images (2)
  • IMG_0284
  • IMG_0283
Last edited by LeMans850i
×
×
×
×