Reply to "Seeking Carburator Recommendations"

There are a lot of great carburetors out there for your application. Agree that 600-700cfm is the right range. You may want to check out the new Street Demon in a 625 or 750 cfm. It is a brand new design that took some of the best features of a Holley and a Carter/Edelbrock carb.

Uses Metering rod for the primaries with triple stack small boosters for great low rpm streetability and response, but then employs huge mechanical secondaries with a flapper valve to dampen the operation so a second accelerator pump is not needed. Very tunable both from a metering rod/spring standpoint and holley secondary jets with an adjustment of the flapper valve to determine when they kick in. It is jetted correctly for a street motor out of the box. I only had to adjust mine for altitude.

It has polymer one piece fuel bowl to insulate it from heat and it will never leak. I have run a lot of different carbs over the years, including the Summit carb which worked well also, but this is my all time favorite right now.