Reply to "SHIFT LINKAGE UPDATE"

dickruzzinMember

Very simple. Get a turnbuckle, maybe from Borgeson, and weld it into the system, probably back in the last segment near the end at the shifter box. I recall the original on my car was about 75mm long.

You do need that to adjust the length of the linkage that sets the shift lever in the center of the slot between the gears on the shifter and the radial adjustment that sets the position of the shift lever to the appropriate gear.

I spent a very frustrating week learning this on my car. I couldn't get all the gears, finally I realized the the joints were worn to the point that proper adjustment was possible.

Dick Ruzzin

9/3/145:07 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...