The whole purpose of the modification is to move the top of the spindle rearward so the thick spacer would go to the front of the ball joint. You could use a level and get the wheel as close to straight up and down as you can with the wheels straight ahead for a starting point. Be sure to measure the toe in and try to get it to zero or as close as you can. This will get you to the alignment shop.
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.