Reply to "Short Circuit During Key Accessory Position"

jwelch68Member

Ok, seems I've been chasing the rabbit down the wrong hole. I've confirmed the issues is not my starter and have figured out how to reset the problem when it happens.

1. The first time the problem happens it is always in the "Start" position.

2. Turn the key off and back to the "Run" position all the dash light are out and the 12V switch is at 7Vdc. All power is dead and when turning the key to the "Start" position, nothing happens, dead silence.

3. Unhook the battery and everything is back to normal, engine turns over and starts just fine.

I'm starting to wonder if the key switch may have a short to ground or maybe there is a bad relay in the system?

Last time this happened I pulled Fuse #10 but nothing changed and all 12V switched power was dead.

Any thoughts?

Thanks,

John

9/17/2311:57 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...