Reply to "Sinking Clutch Pedal"

lf-tp2511Member

Michael,

Sounds like your master has a bad piston cup and is internally bypassing. I had this happen to me when I rebuilt the internal hydraulic throwout (Quella's) to fix it's bad, leaking quad seal ring. With that fixed, I still had no clutch movement!!?? Pulled and rebuilt the CNC master --- didn't LOOK bad --- and all has been fine since. You can rebuild MC and slave --- some say not worth the effort and of questionable results --- or buy aftermarket. Do NOT go with the internal hydraulic throw out, as it is a bear to adjust and requires full ZF removal to do so. Stainless long throw slave --- think Pantera East is cheapest on this --- would be best at the back end. Stock style and aftermarket --- CNC has a nice aluminum unit, call Quella --- masters are available from the vendors.
Good luck, Larry

6/6/059:55 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...