Reply to "Slave Adjustment"

Well I was never able to bleed through the bleed screw with the vacume pump, but yes fluid will come out of the bleed screw if I push in the slave a little, so to me that means it is full. It all worked fine when I hooked up the return spring and shifts excellent now. The pressure on the clutch pedal when beginning to pres it in is much stiffer right at the top, and the pedal seems stiffer too with the long throw. However, it is obvious to me now that the old aliminum slave was shot, and maybe with that unit with it being shot the pedal was just soft anyway due to the bad slave. It seems it all got even stiffer the more I drove it. Thanks for all the advise, it all helped understand this stuff more.