Reply to "Smoke from ZF Inspection Window during Engine Break-In"

larrywMember

Here's some photos of how to do it.

Remove that little jumper you added.

At the firewall solenoid you will move the big cable from the big stud on the passengers side of the solenoid over to join the big cable on the drivers side of the solenoid and secure.

Connect the big cable to the big stud on the starter.

Add a 12 ga wire from the vacated big stud on the passenger side of the solenoid and run it beside the big cable and connect to the solenoid terminal on the starter.

You are done.

Attachments

Hide

Images (2)

8/8/2310:01 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Attachments

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...