Reply to "Snapped bolt in block - how deep can this be drilled?"

angelobMember

Thanks for the advise on the frozen plug. I will most likely try it this weekend. I am hoping that I am not going to have to pull the heads off. I have developed a pretty bad ignition breakup around 3200 rpm under load. Fine sitting still but pretty bad on the road. Gonna pull the plugs tomorrow.

I tapped out the heater hose bib on the block a couple weeks ago. I have been running hotter with the new tstat since the front engine reassembly. Gotta walk away from this engine for a day and mentally mellow out.....

Thanks again,

Angelo

6/30/103:47 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...