Finally, some progress!
Was able to get top piece bent, and fitted. RH two screws will mount at the top of the sheet metal, but that's OK. You can see upper two holes in the aluminum cover. Screws pass thru these holes into steel tower of the e-brake.
Test fitting shows that I will need to modify the mounts on the seat to put the seat outboard on the tracks (towards the door) about 1/8" or so. Seat back bucket was just touching the top front screw on the RH side..... about the width of the screw head is all I need!
Cheers!
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.