Reply to "Source for replacement Pantera steering rack"

I replaced the rack mounts on my friend's Pushbutton because the rebuilt rack on his car had the shoulders on the driver side mounting point was slightly wider and allowed the whole rack to move side to side a little which translated to a lot of play on the steering wheel.

I also have the original rack off a 73L which uses the later bracket. The early bracket off the Pushbutton fit perfectly on it but I didn't mount it to a car to check for play under load. The later brackets have a bevel cut on he radius of the opening on both sides. According to Wilkinson, that's how they're made. I assume so that they fit tight against the saddle to insure no play.

So, it may be hit or miss. You may or may not have to make a mod depending on your bracket you have.