Reply to "spark timing"

belgiumbarryMember

needed to remove the carb to get acces to the manifold bolts...got them all on torque but recent drive proved no progress....above 4000 rpm sometimes irregular engine noise and feeling , sometimes no assisted brakes

so all problems are still there.

Checking all i did see some fresh grease leaking on the inside rear axle passenger side ...

drivers side is clean... so i already removed this evening the rear + 1 inch spacers to load the rear axles as by factory.I got them with the car ( not installed) and mounted them to get a more fluid line body-tires...but now afraid i loaded the bearings/gaskets to much...

???
I'm gonne forget a bit "the looks" and choose for OEM design... and see what happens. There is no play in it.. so far.
As far i see they can't be greased , so life time filling ??

6/22/142:26 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...