Reply to "Special turn signal stalk/switch"

lf-tp2511Member

As I do not have a flash to pass switch in hand, I'm unable to confirm the wiring of the switch. However, Simon stated the flash to pass function was used for flashing the Carello driving lights found on the GT5 and GT5S cars. If that is true I surmise the flash to pass action is closing a circuit, probably closing a relay to turn on those lights.

I will be using the output of a voltage-sensing relay module to power the coil on the DRL's power relay.

(The voltage-sensing relay's power source is taken directly from the battery. Thus, when the alternator starts supplying 14.5V to the battery, the module, no longer detecting just the 12V from an at-rest battery, will close it's circuit, sending power to the DRL's power relay coil.

I will use the flash to pass function to interrupt that module signal.

Thus, the highbeam or low beam headlight circuits do not even come into play.

Larry

10/10/178:25 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...