Reply to "Start Problem"

rockyMember

If Steve’s test fails, it can point to a couple of things.

One would be a failure in the ignition switch (in the run position).

A second possibility (also discussed above) is a failure in the ballast resistor circuit. You can troubleshoot the resistor easily, by putting a jumper across the two terminals of the ballast resistor, and again look for voltage at the plus side of the coil…

If still no voltage at the plus side of the coil, you’ll have to trace wires…

Rocky

10/25/232:43 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...