Reply to "Starter Interlocks & Override - Do NOT understand"

Team Tx for feedback! Got the message...
the whole wire loom is under REBUILD. Using the base drawings (late) from the forum tech tips and modify them as applies. Correct the Color schema is a mess..Also lots of wiring is by far too thick/diameter..adhering here to the Industry standards, most is 1.5 or 2.5 mm*2.
1) adding app 90 yards of new wire (as some wiring has pretty hard PVC, hence inflexible)
2) add to the Headligh System relais in the front and fuses
3) add as per details vom George the Fan wiring, including relais and fuses (the Fans draw app 8- 10 Amps each/Fluidine pull Fans)
4) all wiring on Dash and console go on connectors
5) seat belt signal light taken out, buzzer out
6) all window motor stuff via 2 relais each, and Fuses go in the fuse block as got spares due to move of Fan and headlights to front
7) Door motor overhaul, looks like new now, runs well even with 5 Volts supply...
8) window motors overhaul
..etc..is Winter over here and Body still in paint shop, engine needs final assembly..

Matthias