I recently did mine. Pull the steering wheel. Remove the outter wheel hub, you'll find a large nut holding the steering wheel to the post inside. Take the nut off, use a gear puller and remove the wheel, reposition it, press it back down then tighten the nut to take it the rest of the way down until it's tight. No big deal Ron.
Mark the wheel first on the inside where it is before pulling the wheel off the spines so you know how much to move it. Takes less than an hour to do.
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.