Reply to "Stocking Stuffer"

Mark,
The back of the ATO fuse panel has terminals in similar positions as the original fuse panel. Unplug each wire one at a time, transfer it to the ATO fuse panel. I also added 2 fuses for the power windows, my 72 had a separate little box with 2 fuses in it. I moved those fuses the end of the ATO fuse panel. This fuse panel has a total of 14 ATO fuses.

Bolts into the original mounting holes and uses the same screws and insulator plastic shim. The door closes without interference. None of the wires have to be lengthened. All of the materials used in this fuse panel are of high quality. All parts meet or exceed 30 amp ratings. This is an open frame design to allow for cooling. A typical 30 amp ATO fuse dissipates 2.5 Watts at maximum current!

Click on the youtube link above and see the demo.

I address headlight issues with other electronic controls. See my website under Headlight Motor controller. This controller switches the lights and motor.

Thanks for the support, I worked hard on this and tried to address the critical areas of the fuse panel.