Reply to "Stress cracks"

Frode (Guest)

My car was a basket case. I have changed about all of the under part of the front. The channels under the floor in the front both sides.The rocker panels outer, midle and inner on both sides. Both B pillars. The roof. In the rear the mid section at the lower back, and parts of the inner wheel wells both sides.
I did not remove all paint and old lead, and beleive that the cracks I have now is in the area where this is added to the body.
After installing the new 408 inch. EFI stroker engine, I believe the power and torque is a bit over the edge, at least the cracks became visible after this.
At least my ZF differential did not aprove of the added effect.
Some of the guys on this forum say they have stopped the cracks from developing further by adding stiffening or handling kits.
In my mind it´s worth a try. But what kit to buy ?
Frode
#1155

9/14/075:58 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...