quote:Originally posted by Mark:
Once again
I thought the job of a Moderator was something other then harassment?
This is the box I used. Mine is already installed so all you would see would be a picture of my hole.
I'm not pulling it out to take a picture of it.
This is a scan from the Hall catalog.
It came with a reinforced stainless top which doesn't show here.
I'm pretty sure that the bottom has three louvres punched in it also.
You need to supply your own grommets and the battery floats in the box with no firm mounting.
I have an Optima in mine, I think it's a size 24 or 22? You need a small case size to fit it in.
I found that the hydraulic line from the clutch exits in exactly the wrong spot.
I put a banjo fitting and a -3 Earls flex line in to keep it out of the way of the battery insertion.
It isn't a difficult installation but it is very tight and takes more patience then skill. A block ow wood and a rubber mallet will help also.
Hope this helps.