Reply to "Sucking and poping. Lots of noise not moving like she should"

ausfordMember

quote:
Originally posted by Bumblebee13:
Im sorry.. My original dizzy was a dual point. I could not get it to spark. Even with lots of time working with the points. So the guy at the pantera shop suggested the ready to run msd

You were saying earlier the car ran ok with the original parts.

If that was the case what distributor were you using before you put the MSD dissy in ??

"Ok have a 72L with stock motor. Have edelbrock manifold, holley carb, msd ready to run dizzy and hall exhaust. Just tonite i got it started and it fired right up but now i has a slight pop on the driver side of the exhaust. And when i raise the rpms it let out a puff out of the carb. I have my timming set at 10 degrees. It ran fine before when it had all stock parts. "

5/21/158:04 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...