quote:
Originally posted by kcoffield:
It depends upon which heads you have. If you really want to run a funnel web, you only have one choice. Drill holes in the front of the water jacket of your cylinder heads, install fittings, and route to a custom fabbed and remotely located tstat housing. This is SOP with the circle track guys (without the tstat anyway).
Kelly Coffield
Can I do this with the 3V aluminum heads that PI is selling? I am currently running a old set of "high port" iron 4V heads(Bud Moore)and the Funnel Web intake.I am happy with the power(340 rwhp on Dynojet)but they leak oil from somewhere and I can't seem to make it stop.I had to have studs made up for them and I think it will be a bitch to remove them to fix the leak.I wanted to replace them with a set of the aluminum 3V heads if I could.I will be ,some day down the road,changing to a SVO block and didn't want to spend the money on the 3V's if I won't be able to use them on the new motor.
Thanks for your time,
Ron
[This message has been edited by r mccall (edited 12-28-2002).]
[This message has been edited by r mccall (edited 12-28-2002).]