Reply to "Tach and fuel guage stopped working......?"

joe1974l6656Member

Being in the Electrical Trade connections are normally an issue oxidation happens. Look at or download the directions for the distributor to get a good start. I would remove and clean all terminations from the distributor all the way to the tach make sure you include the grounds, if you can't get to them plug and unplug a few times rub them with an eraser, scotchbright just get them clean. If it still does not work take an ohm meter and check the connections to make sure the wires are still good. I run the stock dual point in my car so all I can help with is the stock wiring that you can find on this site, or on Panteraplace.com. Good luck. One last thing if it worked when you parked it and you have not done anything it should work when you try it... if not the options are environment (oxidation) or heaven forbid creatures eating wires (happens in my trade a lot).

2/20/126:42 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...