Anybody got a diagram or picture of the wiring on the back of the taco. Can't seem to find anything on Pantera place website and I need to know if mine is wired correctly. Wiring diagram just shows +ve and -ve but not colour specific.
Just finishing restoring my car and when I turn on the ignition the gen light comes on correctly but the rev counter goes to max. I see on the diagram a 12v LB comes from fuse 12 and then via a white to the gen light.
If the taco goes to max have I got the polarity of the +ve (LB) and the -ve (B/BK) the wrong way round on the back of the taco or what would cause the taco to go to max.
Secondly the amp guage, Once the 2 heavy wires are attached to the back does it bring a lot of the systems hot via the two pinks like all systems from fuses 7,8, 9 plus headlight switch etc etc. My windscreen wipers came on as I attached the battery for the first time and didn't realise they were on the hot circuit. Little concerned that so many systems seem to be on the hot circuit so is this normal. Does the amp guage only show drawdown or charging, is it not a switch of any sort.
Cheers
Horace
Original Post