Reply to "temp gauge"

huskerMember

Ron, I hope it wasn't the same guy! He (or someone did this for him) installed an aftermarket coil and didn't use the current limiting resistor, consequently the insulation for the iginition wire from the switch all the way to the coil was melted! Lucky the cat didn't catch on fire. Surpisingly not too difficult to replace, plus have learned quite a bit about the in's and out's of the electrical system. If you need help, just ask.

quote:
Originally posted by ron norman:
Thanks, Husker. I found some loose, cut and disconnected wires under the skin of my cat and this is causing some concern... another project!!! May as well look at all the systems while underneath it.

So the guy told you it had a Transaxle temp sensor and had three sensors for temp? I had to laugh, maybe the same guy got ahold of my car and cut some wires!!!!

6/14/0311:16 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...