Reply to "The death of an engine"

panteradougMember

Contact Wyandorf. They can give you the specs on the od of the sleeves. You can ask them if they can supply sleeves for the overbore once you know what that number is.

I would think that they can.

I think that the oil hole is around .061" but there was previous discussion here by some of our Pantera brethren that have done the installation.

I'm pretty sure that Rocky has done a kit installation.

I have not. My engine was built before those kits became available.

I am thinking though that if the sleeves were "homemade" perhaps they did not machine out the existing lifter bores and instead machined the inserts to fit the stock bores? If that is so, you are in luck.

You would just need a new kit and not need anything custom made for you.

You should disassemble the block though so that you can be sure that no metal filings get into any of the other assemblies.

Good luck!

2/11/257:50 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...