Peter, just to clarify; Paul used the Eastwood Detail Gray that comes in a can, not the aerosol spray version. His advice was to apply three light coats, thinned 10% with lacquer thinner. Allow 15 minutes between
coats and let it cure for a couple of days before handling. Also, don't forget to mask off all
rubber seals (input shaft and output flanges). I hope this helps.
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.